Skip to content
guideOctober 30, 2026 · 12 min read

How to build a crypto card app like RedotPay: issuing, costs and launch plan

Planning a crypto card like RedotPay? How card issuing, BIN sponsors, wallet software, stablecoin conversion, compliance, costs and launch timing fit together.

Kostiantyn Boiko, Blockchain Engineer

RedotPay is a Hong Kong-based app where people hold stablecoins and spend them with a card. Its website claims more than 9 million users in over 100 countries and $12 billion in annualised payment volume. It raised a $107 million Series B in December 2025, and in February 2026 Bloomberg reported that it was exploring a US listing at a valuation above $4 billion. That growth is why “an app like RedotPay” is a common brief in 2026.

Behind the app sits a stack most users never see: a wallet, a licensed card issuer, a conversion engine and a compliance programme. We build the wallet that runs as the reference wallet app, and in October 2026 we scoped a card programme for it with card-issuing providers. This guide covers what an app like this is made of, where the money goes, which countries you can serve, what it costs and how long it takes.

How RedotPay works

Everything below comes from RedotPay’s website, its help centre and public announcements, checked on 30 October 2026. Fees and country lists change, so check the current pages before relying on them.

  • Funding the account: users deposit USDT, USDC, BTC, ETH and other assets, each on the networks listed in the app.
  • Cards: the fee page lists $10 for a virtual card and $100 for a physical card, both one-off.
  • Paying: RedotPay describes real-time conversion of crypto at the moment of payment. Its fee pages list a 1% conversion fee on purchases and ATM withdrawals, an extra 1.2% when paying in a currency other than the card’s, and 2% on ATM withdrawals.
  • Who issues the card: RedotPay says it is “a fintech service provider and not a bank”. A February 2025 announcement described its Singapore programme on Visa, with StraitsX, a licensed Major Payment Institution in Singapore, as BIN sponsor. Its site does not name the issuers for other regions.
  • Where it works: the service is not available in 41 countries, including the United States and mainland China. Cards are not issued in 47 regions, a list that also includes India, Indonesia, Singapore and Turkey, citing “global sanctions and card network restrictions”.
  • Apple Pay: RedotPay’s own notice says that after Apple reviewed Hong Kong “cards-as-a-service” programmes, adding new cards to Apple Pay was suspended from 22 August 2025, while cards already added kept working.

Four lessons for anyone building the same thing:

  1. You can launch without becoming the card issuer. A licensed issuer runs the card programme; your company stays responsible for its own wallet and services.
  2. Country eligibility has several owners: local law, the issuer, the card network and your own licences.
  3. Apple Pay and Google Pay are approved per programme and can be suspended.
  4. Model the margin, not only the fees: card, conversion and FX income on one side; programme fees, support, fraud and disputes on the other.

How a crypto card works

The merchant never sees crypto. A shop in Istanbul or Madrid takes a normal Visa or Mastercard payment and is paid in its own currency. Everything crypto happens before that, inside your app and at the card issuer.

  1. The user deposits USDT or USDC, or BTC, ETH or SOL that your app converts, to an address in your wallet.
  2. The card is issued by a licensed issuer: a bank, an e-money or payment institution, or a Visa or Mastercard principal member. Your app is the front end of that issuer’s programme.
  3. Crypto becomes dollars or euros at one of two moments:
    • Prepaid: the user moves stablecoins to the card balance, the balance is converted, and purchases draw on it. Simple to build and to explain.
    • Just-in-time: the card has no balance of its own. When the user pays, the programme checks the wallet, reserves the amount and converts at that moment. Your authorization service has to answer within seconds, every time.
  4. The issuer settles with the card network, usually in fiat. Stablecoin settlement is now possible for some issuers: Visa launched USDC settlement for US banks in December 2025, and Mastercard extended USDC and EURC settlement across Eastern Europe, the Middle East and Africa in August 2025. A stablecoin-funded card does not automatically settle in stablecoins.

The model is growing fast: by March 2026 Visa counted more than 130 stablecoin-linked card programmes in over 50 countries.

The five parts you need

1. The wallet

Accounts, two-factor sign-in, deposit addresses on the chains your users actually use, a ledger, withdrawals and custody of the keys. In emerging markets the first network users ask for is usually USDT on TRON, which has its own costs and failure modes; we covered them in how to cut TRON energy costs and why USDT deposits get stuck. Custody models, recovery and app-store review are in how to build a crypto wallet app.

2. The card programme and the BIN sponsor

A card programme typically involves three roles, sometimes inside one company:

  • Issuer or BIN sponsor: the licensed institution whose card number range (the BIN) your cards use. It connects to Visa or Mastercard, carries the regulatory responsibility for the card, and decides which countries and customers it accepts.
  • Processor: the platform that handles authorization requests from the network and, depending on the design, keeps card balances.
  • Programme manager: the company you usually sign with. It coordinates issuer and processor and gives you one API: create a card, load it, freeze it, receive transaction webhooks.

Start with virtual cards. Physical cards add printing, shipping and address checks. Apple Pay and Google Pay make a virtual card useful in shops, but they are certified per programme and are not available on every BIN, so ask before you sign.

3. Conversion and treasury

Users hold BTC, ETH and USDT; the card spends dollars or euros. You need a conversion step inside the app (an instant convert at a quoted price is enough), stablecoins to fund the card programme, and a rule for who carries the price risk between top-up and purchase. Prepaid programmes usually ask for a float at the issuer, sized to a few days of expected spend.

4. Compliance

Plan for two layers of KYC. Your wallet checks its users; the card issuer usually runs its own check on every cardholder and often cannot reuse yours. On top of that come screening of incoming crypto (where it came from), sanctions screening, transaction monitoring, and a source-of-funds review when money moves from your custodial wallet into a cardholder’s account. Before it signs, the issuer reviews your company, your owners and your fund flows.

5. Operations

Card support is different from wallet support. Users ask why a payment was declined, want a lost card frozen, and dispute purchases. A merchant refund arrives in dollars after the user’s crypto has been converted, so decide in advance whether you credit dollars or convert back. Fraud follows the money: account takeover, stolen cards used to buy crypto, and top-ups from flagged addresses.

Three ways to get a card programme

Route Who carries the card licence Typical time to launch When it fits
Crypto card-issuing provider (a programme manager with its own BIN sponsors) The provider and its issuers, who also check your cardholders A few weeks to a few months, once your company is accepted A wallet or exchange launching its first card
Classic stack: a processor plus a sponsor bank or e-money institution The sponsor; you take on more of the compliance work Six to twelve months Larger programmes that want control of every part
Visa or Mastercard principal membership You, as a licensed issuer Years, with capital and audits Companies whose main business is issuing cards

Providers worth looking at in 2026 include Rain, Reap, Immersve, StraitsX and Wallester; Marqeta and Thredd are processing platforms that need a separate BIN sponsor. They do not all play the same role or cover the same countries, so confirm the issuer, the network, the supported markets and their appetite for your business directly. None of those we checked publishes programme prices; every quote depends on your countries, card volume and spend.

Check who owns your provider, too. Kraken’s parent Payward completed its acquisition of Reap in July 2026, and the wallet company Exodus bought Baanx in May 2026. If a provider belongs to a group you compete with, ask which group companies can access your cardholder and transaction data, and what happens to your contract on a change of control.

Which countries you can serve

The card’s country is the issuer’s country, not your user’s. A card issued in the US, Hong Kong or Singapore can be used by residents of many other countries, but every issuer keeps a list of countries it will not serve, and the final decision is made per cardholder at KYC. RedotPay’s 47-region card list shows how long that list can be.

  • EU and EEA: programmes for European residents usually run with an EEA issuer, and the crypto services in your app need MiCA authorisation in the EU now that the transition periods have ended.
  • United States: many crypto card apps exclude US residents, as RedotPay does. Serving them typically means a US sponsor bank plus federal and state money-transmission obligations for the wallet business.
  • Countries that restrict crypto in payments, such as Turkey, where a 2021 regulation keeps local payment and e-money firms out of crypto flows: get local advice before you target residents. A card issued abroad does not settle the question on its own, and providers will ask about your user mix.

Country also shapes your margins. When the card’s country differs from the country where users shop, most purchases carry a cross-border fee. An issuer in your users’ region can reduce that cost.

What it costs

Your costs fall into three groups.

Software. The wallet, custody, conversion and admin tools, built or licensed. Our price list shows what the wallet costs on each model.

The card programme. The figures below are examples from quotes we received in 2026 for programmes issued outside the user’s country. They are not a market benchmark and not an offer; your quote depends on the issuer, region, volume and contract.

  • a one-time integration fee in the thousands of dollars, plus a monthly platform fee or a monthly minimum in the low thousands;
  • per card: well under a dollar to issue a virtual card, and cents per month for each active card;
  • per purchase: fixed authorization and settlement fees of around 40 cents in total, plus a cross-border fee of 1.2 to 1.3% when the card’s country differs from the shop’s;
  • about 0.1% to load stablecoins, and roughly $2 per KYC check.

Liquidity. The float you keep at the issuer and the stablecoins you hold to convert user crypto.

Per purchase, with those example fees and a foreign-issued card:

Purchase Fixed fees Cross-border (1.2%) Load (0.1%) Total Share of purchase
$30 $0.40 $0.36 $0.03 $0.79 2.6%
$100 $0.40 $1.20 $0.10 $1.70 1.7%

The table leaves out monthly fees, KYC, conversion spreads, fraud, disputes and support. Even so, it shows that small purchases are where programmes lose money, so price for them, as RedotPay does with a card fee and a conversion fee. Interchange, the share of the merchant’s fee that can come back to a programme, helps; for crypto programmes it is negotiated, usually volume-based and rarely enough on its own.

How long it takes

  • The wallet: built from scratch, plan for many months before the stores approve it; our wallet guide describes what that involves. With licensed software the work is branding, configuration, integrations, security testing and store review, which takes weeks rather than months.
  • The card programme: a review of your company (owners, business model, fund flows, target countries), the contract, API integration, testing and the issuer’s go-live approval. With a ready wallet and a provider that accepts your markets, six to twelve weeks is a reasonable plan, not a promise; providers advertise faster.

A sensible order:

  1. Wallet live with deposits, convert and withdrawals.
  2. Virtual card for one region, with a waitlist in the app.
  3. Apple Pay and Google Pay, then physical cards.
  4. A second issuer or region, so one sponsor leaving does not switch off every card.

Risks to plan for

  • The sponsor leaves. In June 2020 the UK regulator froze Wirecard Card Solutions, and cards from several fintech and crypto programmes stopped working overnight. Keep the option of a second BIN.
  • Mobile-wallet access changes. RedotPay’s August 2025 Apple Pay notice shows that Apple Pay support can be paused for a whole programme.
  • The provider changes hands, as two did in 2026.
  • Refunds and disputes arrive in fiat after the crypto has been converted.
  • Concentration: one issuer, one processor and one stablecoin are three single points of failure.

Questions to ask a card provider

  1. Which institution issues each BIN, from which country, and which of our countries can it serve?
  2. Will you onboard our company as it is, and who runs cardholder KYC? Can our existing KYC results be reused?
  3. How are cards funded: prepaid in USDT or USDC on which chains, or just-in-time? What float do you require?
  4. The full fee schedule: setup, monthly minimum, virtual and physical cards, authorization, settlement, cross-border, FX, ATM, declines and KYC. What share of interchange comes back to us?
  5. Do Apple Pay and Google Pay work on every BIN?
  6. How many programmes lost a BIN in the last two years, and what is the migration plan and notice period?

Crypto card FAQ

How does RedotPay make money?

Its published pricing lists card issuance, conversion, FX, ATM and some merchant-category fees, plus a paid Pro tier. Those prices do not show its full revenue mix or margins.

What is a BIN sponsor?

The licensed bank or payment institution whose card number range your cards use. It connects to Visa or Mastercard, settles transactions and carries the regulatory responsibility for the card. Your app runs the customer experience on top.

How do I create a crypto debit card?

Decide your target countries, custody model and funding flow; check what licences your wallet needs there; pick an issuing provider; integrate the wallet with its card API; then pass testing and the issuer’s go-live approval. Note that a card loaded by selling crypto is usually a prepaid card rather than a debit card linked to a bank account.

Do I need a banking licence to launch a crypto card?

Usually not. Most programmes use a licensed third-party issuer instead. Your company may still need crypto, payments or money-transmission authorisations for its own activities in the countries you serve, and the issuer’s approval does not replace your own legal check.

How much does it cost to launch a crypto card?

In the quotes we saw, the card programme starts with an integration fee in the thousands of dollars and a monthly fee or minimum in the low thousands, before per-card and per-purchase fees. Add the wallet software and the float.

How long does it take?

With a ready wallet and a provider that accepts your company and markets, two to three months is a reasonable first plan. Building the wallet yourself adds many months.

Can users in Europe use a card issued in Hong Kong or the US?

Often not. Many issuers outside the EEA do not accept EEA residents, and programmes for Europe usually run with an EEA issuer. Check each programme’s country list.

Custodial or self-custody?

Both exist. In a custodial app such as RedotPay, the app holds the balance it converts. Self-custody-linked cards such as Gnosis Pay, ether.fi Cash and the Bitget Wallet card draw on a wallet the user controls, through spending permissions or a funding step. For any design, ask who controls the keys and where the funds sit at the moment of purchase.

Getting it turnkey from BitPolaris

BitPolaris Wallet is the software behind the reference wallet app: Android, iOS, macOS and Windows apps, a custodial backend with multi-chain deposits including USDT on TRON, instant convert, KYC integration and an admin console. The card is the next feature on that wallet, and its waitlist screen is already in the app.

For the card side we work with a card-issuing partner in Singapore that runs Visa and Mastercard programmes: virtual and physical cards, USDT and USDC top-ups and an API with webhooks, with Apple Pay and Google Pay on supported programmes. We connect the two, so you can launch one app under your own brand with wallet, conversion and card. Card availability, countries and pricing depend on the issuer’s review of your company and your markets.

You run the business under your licence; we deliver the software on your servers or ours. Contact us with your target countries, company jurisdiction, expected number of cardholders and monthly card spend. We will come back with the card options that fit and a fixed quote for the software.

Sources

RedotPay is a trademark of its owner; this article describes its public product and does not imply any affiliation.

Add a crypto card to your wallet

Wallet software plus our card-issuing partner in Singapore. Send your target countries and expected number of cardholders.